Installation instructions

How to prepare the mirror without LED backlight for mounting?

1. Place the mirror on a stable, flat surface.
2. Clean, degrease and dry the surface of the mirror where you will stick the hangers.
3. Remove the adhesive protection film from the metal hangers.
4. Stick the hangers onto the dry and degreased surface of the mirror.
Note: You have to wait 24 hrs. for the hangers to reach 100% strength after sticking them on. Wait 24 hrs. before hanging the mirror in its final location.
5. Measure the distance between the centres of the previously glued hangers.
6. Mark the measured distance on the wall, then drill holes in the marked places and insert the expansion pins.
7. Fasten the hooks with the supplied screws.
8. Hang the mirror by sliding it carefully from the top.

All done!

How to prepare the mirror with LED backlight for mounting?

1. Place the mirror on a stable, flat surface.
2. Clean, degrease and dry the surface of the mirror where you will stick the hangers.
3. Remove the adhesive protection film from the metal hangers.
4. Stick the hangers onto the dry and degreased surface of the mirror.
Note: You have to wait 24 hrs. for the hangers to reach 100% strength after sticking them on. Wait 24 hrs. before hanging the mirror in its final location.
5. Measure the distance between the centres of the previously glued hangers.
6. Mark the measured distance on the wall, then drill holes in the marked places and insert the expansion pins.
7. Fasten the hooks with the supplied screws.
8. Connect the power cables to the transformer.
9. Hang the mirror by sliding it carefully from the top.

All done!